中文 English
Services Home > Services > Services

All safety instructions

A. professionals shall not disassemble or disassemble electrical appliances at will to prevent electric shock or incorrect connection.

Under the working platform of B. lifting platform, the work platform of the lifting platform must be suspended and supported in case the platform suddenly drops, causing casualties.

C. shall not adjust the overflow valve at will. Each component in the hydraulic system operates under specified pressure. Any adjustment of the relief valve may result in abnormal operation of the hydraulic system. Unnecessary damage to people, machines, and things.

D. any part of the hydraulic system must be relieved first so that the pressure oil is released and the table suddenly slides down.

Review monthly

A. roller, intermediate shaft and bearing, cylinder, pin and bearing, arm, hinge shaft and bearing, whether or not wear.

B. each part is filled with some lubricating oil to prolong the service life of the bearing.

C. hydraulic oil quality and oil level. The lifting table whole rises, in this position, no hydraulic surface should be higher than the 40-50 mm. Hydraulic oil is dark, sticky or gritty, and should be replaced (32# hydraulic oil) if found

After the year-end maintenance

A. check all hydraulic piping and fittings. The pipe shall not be damaged, the joint shall not be loose, and all joints must be screwed.

B. remove and disassemble the drop valve, blow the plunger with compressed air, and then load it and re install it.

C. hydraulic oil was put up and tighten the joint out of oil filter, wash, use compressed air to clean up, and then back into the fuel tank, and connecting pipeline.

Replace the old oil with the new oil. Otherwise, moving parts in the system will accelerate wear and tear. )

After the customer service service

The company strictly in accordance with national quality requirements, the implementation of three packs:

A weekly, in return

A the product received by the customer does not meet the requirements of the order, and can not be used properly.

B products have defects that cannot be used properly and cannot be repaired.

Two, one month replacement

A the product received by the customer does not correspond with the order of the product

B in the delivery of the transport process, resulting in product defects, can not be repaired.

Three, one year repair

A from the date of delivery of the product within one year, under normal use, due to product quality reasons (improper use and other reasons for the warranty does not belong to the scope of warranty) caused by equipment failure, free warranty.

After the service tenet

Suzhou Carter cantop Machinery Equipment Co., the company has consistently adhered to customer first business philosophy, It's perfection itself., committed to providing customers with quick and thoughtful service. In improving the quality of products at the same time, always to provide customers with good service as the company won the market Guan Jian. In any area, can be Suzhou Carter cantop machinery limited company of professional and technical personnel of the most timely and quality service.

This quality assurance

The products sold are responsible for the refund, replacement within 30 days after delivery, the costs incurred by Carter cantop.

1. the product received by the customer is not in conformity with the order of the product.

2. the product received by the customer does not meet the requirements of the order, and can not be used properly.

3., the product can not be used properly and can not be repaired defects.

4. in the delivery of the transport process, resulting in product defects, can not be repaired.

This product warranty

Within one year from the date of delivery of the product, under normal use, due to product quality reasons (improper use or other reasons) caused by equipment failure, free warranty.

This product maintenance

Suzhou Carter cantop mechanical equipment limited company to provide lifelong products door and other accessories in the supply of cheap maintenance for customers.